14
2023
-
03
What are the precautions for using an electric butter machine?
The electric butter machine is suitable for punching machines, pressure presses, simple plate bending machines, mining machinery, construction machinery, etc. It can be used to adjust intermittent oil supply using microcomputer controlled display, and has a relatively wide range of standby and working time adjustments. Therefore, it is also widely applicable to equipment.
1. When not in use for a long time, the pipeline upstream of the valve should be closed to relieve pressure.
2. When using, the pressure of the oil source should not be too large, and should be kept below 25 MPa.
3. When adjusting the positioning screw, the pressure in the cylinder should be removed, otherwise the screw cannot be rotated.
4. To ensure the accuracy of the amount of fuel added, the valve should be refueled and reversed 2-3 times after initial use or adjustment to completely exhaust the air in the cylinder before normal use.
5. When using this system, pay attention to keeping the grease clean and not mixing with other impurities to avoid affecting the performance of the dosing valve. Filter elements should be designed in the oil supply pipeline, with a filtering accuracy of no more than 100 meshes.
6. During normal use, do not artificially block the oil outlet to avoid damaging the parts of the pneumatic control part of the combined valve. If a blockage occurs, it should be cleaned up in a timely manner.
7. When installing the valve in the pipeline, pay special attention to the oil inlet and outlet, and do not install it upside down.
Next page
Next page
Related information
Service hotline:
Contact Us
Address: No. 1, Shenghou Industrial Zone, Diankou Town, Zhuji City, Zhejiang Province
Tel：0575-87669265
Fax：0575-87669858
Person to contact： 15957517907 (Mr. Dong)
Email：hd@zjdf88.com
Copyright Zhuji Dongfei Machinery Accessories Factory www.300.cn SEO Business license