15
2023
-
03
How to prolong the service life of the grease gun?
How to save costs and extend the life of the electric butter gun? The following four points must be noted. Let's take a look:
The first is that the leather bowl is not good, which is a common problem of all domestic oil guns. The structure of an oil gun is relatively complex compared to ordinary tools, but if the products it makes or buys are useless, it is not a waste of resources, so we still need to support domestic products.
The second is that the oil pressure mechanism is not good, but if the spring and check ball are OK, they probably cannot be repaired.
Third, there are some failures in use. Many of the failures in use are caused by our own operations, and we can find ways to avoid them. If you mix a few grains of sand in the butter and use a pointed nozzle at this time, it ensures that you swear not to throw it away with an oil gun in the future, and it is not good for the equipment. However, most of this is caused by yourself. Therefore, we must maintain the cleanliness of the butter used, do not use unclean tools to refuel, and timely cover the containers for oil discharge.
Fourth, when the grease gun is being refueled through the nozzle, oil may overflow from the nozzle. This problem is not necessarily due to a problem with the gun or the nozzle, but rather to a problem with the pressure of the gun selected by the customer or due to the improperly adjusted tightness. During the use of the machine, there may be an internal and external pressure difference, so that a small pressure grease gun cannot inject oil. Therefore, when selecting a grease gun, it is necessary to understand the appropriate pressure.
As long as the above points are achieved, problems with electric grease guns can be quickly resolved.
Next page
Related information